The NGW100 uses the AT32AP7000 which combines Atmel's state of the art AVR32 Digital Signal Processor CPU with an unrivalled selection of communication interfaces.

The NGW100 has two Ethernet ports, SD and MMC card reader, and connectors for USB and JTAG.

The NGW100 is also an ideal development board for the AT32AP7000. All resources are available, and it supports communication on any of the device's communication interfaces. The board is preloaded with Linux and shipped with I/O interface drivers that can be called from your own code.

For documentation and resources, visit AVRfreaks wiki

The EVK1101 is an evaluation kit and development system for the AVR32 AT32UC3B microcontroller. It is equipped with a rich set of peripherals, memory, and makes it easy to try the full potential of the AVR32 devices. Supports the AT32UC3B Sensors: Light, Temperature Connectors for JTAG, Nexus, USART, USB 2.0, TWI, SPI SD and MMC Card Reader

The EVK1100 is an evaluation kit and development system for the AVR32 AT32UC3A microcontroller.
It is equipped with a rich set of peripherals, memory, and makes it easy to try the full potential of the AVR32 devices.

• Supports the AT32UC3A
• Ethernet port
• Sensors: Light, Temperature, Potentiometer
• 4x20 Blue LCD (PWM Adjustable backlight)
• Connectors for JTAG, Nexus, USART, USB 2.0, TWI, SPI
• SD and MMC Card Reader

STK1000 provides a complete AT32AP7000 development environment. The kit has two ethernet ports, a high quality QVGA LCD, a loudspeaker, and connectors for USART, PS/2, VGA, and USB. A expansion header can be used for prototyping.

A pre-installed Linux image on the enclosed 256 MB SD card ensures that the user can boot Linux and start program development directly after power up.

STK1000 is also supported by AVR JTAGICE mkII. With either GNU GCC or the IAR compiler, the JTAGICE mkII supports basic runtime control and a limited trace.

The Vitra and the Opella products from Ashling supports provide high-end debugging capabilities as e.g. sustained trace and SQA (software quality assurance). An extensive white paper is available at www.ashling.com (PDF).

ATMEL AVR32 ATSTK600-TQFP64-2  (ATMEL Version)

ATMEL AVR32 ATSTK600-UC3-144  (ATMEL Version)

The Atmel AVR® STK600 is a complete starter kit and development system for the AVR and AVR32 flash microcontrollers from ATMEL Corporation. It is designed to give designers a quick start to develop code on the AVR, combined with advanced features for using the starter kit to prototype and test new designs. STK600 is shipped with a ATmega2560 device board.

Socket and adapter boards are available for the whole range of AVR's, from 8- to 144-pins devices. The socket and adapter boards must be bought separately.

Visit the STK600 Socket Package Selection Guide to find the right expansion module for your device.

The AVR Studio and AVR32 Studio online-help contains the most current information and a complete list of supported devices.